horizontal

Startup SEO / SEM solutions

horizontal

Postby chenchen12495 » Wed Jan 31, 2018 3:14 am

<p>the upper and lower horizontal row of three rows of nozzles is more reasonable, that is, along the width of the center line up and down a row of nozzles. 3 Longitudinal nozzle spacing influence Underground Waterproof Vinyl Australia Longitudinal nozzle spacing mainly affects the temperature distribution in the longitudinal direction, while the influence of the width direction of the temperature distribution is negligible, as long as the length of the temperature variation in different nozzle longitudinal spacing of the impact were discussed. </p> <p>The temperature difference between the two ends of the flat aluminum extruded section increases with the longitudinal spacing of the nozzles. In other words, the longitudinal temperature distribution of the flat aluminum extruded section will be more obvious buy reclaimed painted wood cladding with the increase of the longitudinal spacing of the nozzles. The longitudinal temperature The distribution will be more and more uneven, the longitudinal nozzle spacing should be less than 50mm. </p> <p> The impact of water temperature Two rows of nozzles to implement the program, that is, flat aluminum extruded profiles are arranged on the top and bottom of the two rows of nozzles, and the nozzle spacing between the values ​​of 60mm. The study on the curve of spray cooling temperature on the upper surface length and the width direction centerline of flat aluminum extruded profiles shows that the temperature of flat extruded aluminum profiles will increase with the increase of cooling water temperature but not too Affect the uniformity of the temperature Compositele Floor distribution. </p> <p>That is to say, the flat aluminum extruded profile cooling effect less affected by the water temperature. In summary, the temperature field in the width direction is less affected by the extrusion speed and the temperature field in the length direction is greatly affected, and the temperature field has a moving floor pools critical value affected by the extrusion speed.</p>
chenchen12495
 
Posts: 8803
Joined: Wed Apr 27, 2016 9:27 pm

Re: horizontal

Postby valerothe » Tue May 29, 2018 1:40 am

ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689
ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689
ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689
ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689
ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689
ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689
ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689
ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689
ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689
ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689
ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689ma14689
ma14689ma14689
valerothe
 
Posts: 107001
Joined: Sun May 13, 2018 10:04 am



Return to SEO / SEM

Who is online

Users browsing this forum: valerothe and 2 guests